Richter scale vs. moment magnitude
Updated 2026-11-19
People still say “6.4 on the Richter scale”. USGS mostly doesn’t use it anymore, except for small earthquakes recorded close by.
The Richter scale is the original magnitude formula that Charles Richter and Beno Gutenberg defined in 1935 for local earthquakes. Seismologists write it ML, with the L for “local”. It worked well for what it was made for. The trouble came with bigger and more distant quakes, so a more uniformly applicable scale was developed: moment magnitude, Mw. For very large earthquakes, USGS says, moment magnitude gives the most reliable estimate of size.
The scales you’ll see on our event pages
- ML (local, Richter’s method): roughly magnitude 2 to 6.5. USGS treats it as authoritative only for smaller events, typically under magnitude 4, when there’s no mb or moment magnitude.
- Md (duration): based on how long the shaking signal takes to die down. Used for small quakes, about magnitude 4 and below.
- mb (body wave): from the first-arriving P waves. It tends to saturate around magnitude 6.5, which means it stops growing even when the quake is bigger.
- Ms (surface wave): from 20-second surface waves. Saturates around magnitude 8.3.
- Mw (moment), usually Mww on USGS pages: about magnitude 5 and up. USGS computes it for all magnitude 5+ earthquakes worldwide, and it is the authoritative USGS magnitude when computed.
Different methods on the same quake give slightly different numbers. That’s also why two agencies can disagree. More in why agencies give different magnitudes.
Live: which scale this week’s earthquakes were measured on
Magnitude type of each earthquake in the USGS feed over the past 7 days, as USGS lists it right now.
| Magnitude type | US regions, M2.5+ | Worldwide, M5+ |
|---|---|---|
| Local magnitude (ML, Richter’s method) | 131 (84%) | 0 (0%) |
| Duration magnitude (Md) | 14 (9%) | 0 (0%) |
| Body-wave magnitude (mb, mbLg) | 8 (5%) | 19 (49%) |
| Surface-wave magnitude (Ms) | 0 (0%) | 0 (0%) |
| Moment magnitude (Mw family) | 3 (2%) | 20 (51%) |
| Other or not stated | 0 (0%) | 0 (0%) |
| Total | 156 | 39 |
Of the 39 magnitude 5+ earthquakes worldwide this week, 20 currently carry a moment magnitude. Small US quakes are mostly local or duration magnitudes. A few minutes after a quake the type can still change, because USGS often replaces a quick first estimate once a moment magnitude is ready (see why the magnitude changes).
One step bigger is not “a bit bigger”
Per USGS, each whole number up the scale means ten times the measured ground-motion amplitude on a seismogram and about 32 times more energy released.
| Magnitude difference | Amplitude on a seismogram | Energy released |
|---|---|---|
| 1 | 10× | about 32× |
| 2 | 100× | about 1,000× |
| 3 | 1,000× | about 32,000× |
Energy for 2 and 3 steps is 32 multiplied by itself, rounded. A magnitude says nothing about how strong the shaking was at your house; that’s intensity, explained in magnitude vs. intensity. The biggest magnitudes ever measured are on our list of the largest earthquakes since 1900.
Sources
- USGS — Magnitude types
- USGS FAQ — Moment magnitude, Richter scale: what are the different magnitude scales?
- USGS — Earthquake magnitude, energy release, and shaking intensity
QuakeWhere is an independent site, not affiliated with USGS. More explainers · Live map